Thermo King Athenia AM II 1000
Call for Price
Key Features
Availability
Brochure
MakeThermo King
ModelAthenia AM II 1000
Product Features
Description
A complete range of low-weight, high-performance roofmount HVAC systems for coach and transit applications. Featuring an updated design that delivers improved quality and reliability while offering new features and significant enhancements.
Features
- 10% weight reduction
- Welded frame
- Reduced number of potential leak points
- No sealants used in design
- Stiffer construction for improved unit/bus sealing
- 10% more condenser airflow
- 5% more evaporator airflow
- Access all servicable items from inside bus
- Easy-to-install one-piece design
- IntelligAIRE® III microprocessor controller with CANBUS communications
- Designed to fit CNG, hybrid and diesel buses
Standard Features
- IntelligAIRE® III Control System: Expanded CAN communications capability; Plugs directly into J1939 network to make more info available; Eliminates the gateway module required between bus & unit controllers; Eliminates need for expansion modules external to controller where multiple zones must be controlled independently
- The Thermo King X430 Compressor: Engineered exclusively for transport applications; Built for extended service life; Field repairable
- High Performance R-407C or R-134A: Environmentally safe alternatives with zero ODP
- Electronic Capacity Control: Capacity can be reduced when not needed for fuel savings on cooler days; Improved temperature balance on Arctic buses so capacity can be shifted from unit to unit as needed
- Motorized Water Valve: Improved temperature control in re-heat and heating modes; Eliminates water hammer
Optional Features
- Long Life Brushless Motors: Integral electronics; 10% greater airflow; Maintenance-free; Programmable variable speed; 40,000-hour bearings
- IntelligAIRE® III Electronic Pressure Display Module: Touchpad displays four different pressure readings; Simplifies problem diagnosis and pre-trip inspections
- S391/S616 Screw Compressors: Exclusive oil management system for increased reliability; Fewer moving parts than reciprocating compressors; Lower noise levels and vibration than reciprocating compressors; Programmable capacity control for fuel savings
- Other Available Options: Return Air Grille; Damper-Controlled Fresh Air Module
System Cooling Capacity
- BTU/hr: 113,000
- kW: 33.1 kW
- Kcal/hr: 28,476
- Rated Capacities are at the following conditions: Outside: 35°C/95°F; Inside: 27°C/80°F DB, 19°C/67°F WB
System Heating Capacity
- At 30 Lt./Min.(8 GPM) coolant flow rate and 55K (100°F) temperature differential between return air and coolant.
- BTU/hr: 115,000
- kW: 33.7
- Kcal/hr: 29,040
Evaporator Airflow
- (0 in. water column external static pressure)
- High Speed: 3200 ft3/min
- Medium Speed: 1900 ft3/min
- Low Speed: 1350 ft3/min
Refrigerant
- HFC R-407C
Power Consumption @ 27 VDC
- 120 Amps
Weight
- 470 lbs (213 kg)
Compressor Weight with Clutch (approximate)
- S391: 147 lbs (67 kg)
- S616: 171 lbs (77 kg)
- X426/X430: 115 lbs (52.2 kg)
Capacities
Cooling Capacity | 113,000 BTU/hr (33.1 kW) |
Heating Capacity | 115,000 BTU/hr (33.7 kW) |
Airflow
Airflow Volume | High Speed: 3200 ft3/min |
General
Weight | 470 lb. (213 kg) |
Dimensions | 108.23 x 79.27 x 12.19 in. |
WARNING: Operating, servicing, and maintaining a passenger vehicle, an off-highway motor vehicle, or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.To minimize exposure, avoid breathing exhaust, do
not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.